Huawei CX320 User Manual Download Page 31

Page: 31 / 113

Label

Meaning

Color

Description

HLY

Health indicator

Red and
green

Off: The CX320 is not
powered on.

Steady green: The CX320
is operating properly or has
minor alarms.

Blinking red (1 Hz): A
major alarm is generated.

Blinking red (4 Hz): A
critical alarm is generated.

Blinking red (5 Hz): The
CX320 is not securely
installed.

NOTE

It is difficult to identify the
difference between blinking
frequencies of 4 Hz and 5 Hz. If
the indicator is blinking red
quickly, check whether the
device has been installed
properly and then check whether
a critical alarm has been
generated.

and

Connection
status indicator
for the 10GE
optical port

Green

Off: The port is not
properly connected.

Steady green: The port is
properly connected.

and

Data
transmission
status indicator
for the 10GE
optical port

Orange

Off: No data is being
transmitted over the port.

Blinking orange: Data is
being sent or received over
the port.

and

40GE optical
port indicator

Green

Off: No data is being
transmitted over or the port
is not connected.

Blinking green: Data is
being sent or received over
the port.

Steady green: The port is
properly connected.

CX320 Switch Module
User Guide

2 Product Overview

Issue 09 (2019-08-02)

Summary of Contents for CX320


















































































































Search results

Summary of Contents for CX320

Reviews:

Brands by name

Popular brands

Huawei CX320, User Manual

Search results

Summary of Contents for CX320

Reviews:

Brands by name

Popular brands