Huawei CX320 User Manual Download Page 63

Page: 63 / 113

Table 4-4

Default data

Name

Default Data

Description

Initial user name and
password of the MM910

User name:

root

Password:

Huawei12#$

The default user of the
MM910 OS has all OS
rights.

Software

PuTTY.exe

is free software. You can download it from the Internet. PuTTY 0.60 or later is

required for login over a serial port.

Procedure

Step 1

Step 2

For details, see

6.5 Logging In to the MM910 WebUI

Step 3

HMM Web

, choose

Chassis Settings

The

Chassis Settings

page is displayed.

Step 4

In the navigation tree on the left, choose

Network Settings

Switch Modules

NOTE

On the HMM WebUI, "Swi" is changed to "Switch Modules" from verion 6.91A.

Step 5

Click

Edit

Edit the IP addresses of management network ports of the converged switching plane in
specific slots.

Step 6

Click

Deliver

The IP addresses of converged switching plane management network ports are successfully
set.

Step 7

(Optional) Configure the switching plane gateway.

Use an SSH connection tool to log in to the MM910 CLI by using the floating IP address
of the MM910s.
This topic describes how to use PuTTY to log in over SSH. For details, see Logging In
to a Server Over a Network Port by Using PuTTY.

Configure a gateway address for the Ethernet switching plane so that the switching plane
can properly communicate with the PC.

smmset -l swiN:fruM -d route -v targetvalue maskvalue gatewayvalue

The parameters are described as follows:

–

: specifies the slot number of a switch module. Its value ranges from 1 to 4,

mapping to switch module slots 1E, 2X, 3X, and 4E respectively.

–

: indicates the ID of a switching plane. The value of the converged switching

plane is 2.

CX320 Switch Module
User Guide

4 Configuring the CX320

Issue 09 (2019-08-02)

Summary of Contents for CX320


















































































































Search results

Summary of Contents for CX320

Reviews:

Brands by name

Popular brands

Huawei CX320, User Manual

Search results

Summary of Contents for CX320

Reviews:

Brands by name

Popular brands