manualshive.com logo in svg

Huawei CX320, User Manual

Share
Download
Huawei CX320 User Manual Download Page 111

226 File received ok 
 
FTP: 354428 byte(s) send in 0.238 second(s) 1454.289Kbyte(s)/sec. 
200 Port command successful. 
150 Opening data connection for log_3_20140116085018.log.zip. 
/     100% [***********]  
226 File received ok 
 
FTP: 353715 byte(s) send in 0.265 second(s) 1303.486Kbyte(s)/sec.

[ftp]

cd ..

# On the FTP server, create a log receiving directory for the standby or slave switch module in
the stack. Replace 

2

 in 

swi2

 with the actual stack ID of the standby or slave switch module.

The stack ID is the switch module slot ID. (If the switch modules are not stacked, log in to the
remaining switch modules and follow the preceding procedure to collect logs.)

[ftp]

mkdir swi2

[ftp]

cd swi2

[ftp]

mput 2#flash:/logfile/*

[ftp]

cd ..

[ftp]

quit

221 Windows FTP Server (WFTPD, by Texas Imperial Software) says goodbye 
<HUAWEI>

NOTE

l

When you use the 

mput

 command in the FTP CLI, 

2#flash:/

 indicates the flash root directory of the

switch module with the ID 2. You can obtain the stack ID and role information by using the 

display

stack

 command.

l

The flash root directory of the primary switch module in a stack is 

flash:/

.

l

If multiple switch modules are displayed after running the 

display stack

 command, obtain the log

file of each switch module.

4.

View the log file in the FTP directory on the PC.

----End

CX320 Switch Module
User Guide

6 Common Operations

Issue 09 (2019-08-02)

Copyright © Huawei Technologies Co., Ltd.

105

Summary of Contents for CX320


















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands