Huawei CX320 User Manual Download Page 102

Page: 102 / 113

NOTE

You can query or configure the MM910 floating IP address in any of the following ways:

Use the chassis intelligent display. For details, see

E9000 Chassis Intelligent Display V100R001

Parameter Reference

Use the HMM WebUI. For details, see Configuring the MM910 IP Addresses in

MM910

Management Module V100R001 User Guide

Run the floatip command on the MM910 CLI. For details, see

MM910 Management Module

V100R001 Command Reference

The message "There is a problem with this website's security certificate" is displayed.

Step 8

(Optional) Add the MM910 IP address to the

Trusted sites

zone.

By default, Internet Explorer enhanced security configuration is enabled on the Windows
Server series OSs. Add the MM910 IP address to the trusted sites zone as follows:

On Internet Explorer, choose

Tools

Internet Options

The

Internet Options

dialog box is displayed.

Click the

Security

tab.

Click

Trusted sites

, and click

Sites

In the

Trusted sites

dialog box, click

Add

to add the MM910 IP address to the trusted

site list, and click

Close

Refresh the page.

In the status bar of a browser, check whether the MM910 IP address is in the

Trusted

sites

zone.

Step 9

Click

Continue to this website (not recommended)

The

HMM Web

Figure 6-8

Logging in to HMM Web of version V603

NOTE

The login page varies slightly with the HMM software version.

Step 10

Set the login parameters.

Language

: Select the language to be used.

User name

: Enter the user name. The default user name is

root

Password

: Enter the password. The default password is

Huawei12#$

User must change password at next login

is selected when users are created on the

LDAP server, logins will fail. Deselect this option on the LDAP server.

Log in to

: Select

This Machine/computer

for a local user. If the system manages

domain users over Active Directory (AD), select

LDAP

CX320 Switch Module
User Guide

6 Common Operations

Issue 09 (2019-08-02)

Summary of Contents for CX320


















































































































Search results

Summary of Contents for CX320

Reviews:

Brands by name

Popular brands

Huawei CX320, User Manual

Search results

Summary of Contents for CX320

Reviews:

Brands by name

Popular brands