WenZhou ZhengBang Electronic Equipment Co., Ltd
ZB4050LS Rev 1.1
10
Chapter3 System Setting
3-1 Speed Setting
Fig.3-1 Speed Setting
Step
：
1.Setting 2. Speed 3. Adjust the speed (Higher value, Higher Speed).
!Attention: Adjust the Z axis speed in the feeder edit.
3-2 Nozzle Calibration
Tool Preparation
：
3-2-1 Nozzle Calibration and PCB Camera Offset
1.Fix the 4 round magnets on the calibration substrate with paper(A5)
2.Adjust the width of guide rail ≥correction substrate
，
place the substrate on the left side of the guide plate and click“Load”to send
the substrate to the mount position and clamp it.
3.Place the inkpad in the middle of the high speed camera.
Fig.3-2 Inkpad Location
NO
Name
Qty
Attention
1
Correction Substrate (Stainless Steel)
1
With Machine
2
Round Magnet
4
3
Inkpad
1
4
Nozzle
6
5
Solid Nozzle
6
6
Paper (A5)
1
Self-Match
