WenZhou ZhengBang Electronic Equipment Co., Ltd
ZB4050LS Rev 1.1
12
3-2-2 Nozzle Calibration and HD Camera Offset
1
、
Install 6 solid nozzle
（
Random delivered
）
,select the nozzle(need corrected)
；
click “HD Camera Calibration”
，
then nozzle starts
to automatically calibrate. Then, click“View”to confirm the coordinate is aligned with the center of the nozzle. If failed, calibrate it
again in the same way.
Fig.3-7 HD Camera Correction
Fig.3-8 Calibration Process
Fig.3-9 Correct Result
3
、
Refer to step 1 to complete other nozzle correction one by one.
3-2-3 Nozzle Calibration and High Speed Camera Offset
1
、
Select the nozzle(need calibration),click “High Speed Camera”, nozzle starts to automatically correct. After finished, click “View”
to confirm the coordinates are aligned with the nozzle center. If still offset, calibrate it again in the same way.
Fig.3-10 HD Camera Correction
Fig.3-11 Calibration Process
