WenZhou ZhengBang Electronic Equipment Co., Ltd
ZB4050LS Rev 1.1
16
1.
Program Import
：
Run DXP
（
Altium Designer
），
Import the PCB origin files.
Fig.4-5 Program Import
2.Origin Setting
：
Click“Edit—Origin—Setting”
，
Align the lower left corner insert via, MARK or lower left corner component pad as
the origin.
Fig.4-6 Origin Setting
Fig.4-7/8 Origin Setting
！
Attention
：
Origin usually be set in the bottom left corner. Consider cut of the edge accuracy of PCB is not as required, it
is recommended to select the lower left corner insert via, and the MARK or lower left corner component pad
is more suitable for the origin.
3.Output File
：
Click on "Files - assembly output - Generates pick and place files" to output the coordinate file.
