WenZhou ZhengBang Electronic Equipment Co., Ltd
ZB4050LS Rev 1.1
36
Fig.5-7 Clear Feeder Parameters
3.Double click on the feeder number that needs to be fed
，
4.All components showing the feeder number will be fed after production
，
Fig.5-8 Start Feeder Number
5.Click “Start” to start the feed production.
5-3-2 Specified Component Feeding
1.Switch to “Mark Edit” mode and select manual identification.
2.Return to the production interface and import the production program
，
Click “Match” to match the related program parameters.
3.Click “Start”, enter the Mark point to recognition and calibration status
4.Then click “Status” in the title to set all components to the mounted status.
Fig.5-9 Set the Placement Status
