GSC53N - GSC57 - ZG47
EN - 83
8.3.
ANALYSER FUNCTIONS
For a simple usage, the main working mode of the ANALYSER mode can be
selected by means of
F3
and
F4
.
"
VOLTAGE
" function:
to be used to display
voltage and corresponding
harmonics
(see paragraph 8.4)
"
CURRENT
" function:
to be used to display
current and corresponding
harmonics
(see paragraph 8.5)
"
POWER
" function:
it permits to display
all the parameters measurable by
the instrument
: voltage, current, active, reactive and
apparent power, power factor, cos and energy (see
paragraph 8.6)
"
ENERGY
" function:
to be used to display
active, reactive and apparent
power, power factor, cos and energy
(see paragraph
More practically, we may schematise the right procedure of use the
ANALYSER
function
as follows:
1. Check and eventually modify the "ANALYSER CONFIG" settings of the instrument
2. Using
F3
and
F4
, select the type of measurement to be taken
3. Connect the instrument to the electrical system to be tested
4. Evaluate the values of the parameters under test
5. If you want to record:
a) Decide what to record
b) Press
MENU
and check if the "RECORDER CONFIG" settings meet your
requirements.
c) Consider Typical Configuration recording (see paragraph 10.2).
6. Connect the External Power Supply A0050 (optional for GSC57).
7. Start the recording by pressing
START/STOP
key.
Summary of Contents for GSC53N
Page 1: ...Copyright HT ITALIA 2012 Release EN 1 08 28 02 2012 GSC53N GSC57 ZG47 Instruction Manual...
Page 2: ......
Page 151: ......
