GSC53N - GSC57 - ZG47
EN - 72
7.2.2. RECORDING: setting of Typical Configurations
The following “
Typical Configurations
” are selectable inside meter:
Standard Configuration
Description
LEAKAGE (I1)
Setting of measuring and recording mode of
Leakage current
on I1 channel.
TEMP. °C(I1)
Setting of measuring and recording mode of
Temperature (°C)
on I1 channel.
HUM %HR(I1)
Setting of measuring and recording mode of
Relativity Humidity %HR
on I1
channel.
To activate the above configurations, follow this procedure:
1. Turn the rotary switch on “
AUX
”.
2. Press
MENU
key. The instrument shows the following screen:
MENU GENERAL
SAFETY TEST MEMORY
ANALYSER MEMORY
RESET
ANALYSER CONFIG
RECORDER CONFIG
CONTRAST
DATE&TIME
LANGUAGE
3. Press
MENU
key again. The instrument displays a screen as shown below (picture on
the left). In this way is possible select the desired configuration on I1 channel with
F1
or
F2
key.
TYPICAL CONFIG.
LEAKAGE(I1)
TEMP.°C(I1)
HUM %HR(I1)
TYPICAL CONFIG.
LEAKAGE (I1)
TEMP.°C(I1)
HUM %HR(I1)
Data saved
Configuration selection
Confirmation configuration selection
4. Press
ENTER
key. The instrument displays the message “
Data saved
” for a while to
confirm the desired configuration (see above picture on the right). The instrument
return on the measure mode and you can start recording by pressing
START/STOP
key.
Summary of Contents for GSC53N
Page 1: ...Copyright HT ITALIA 2012 Release EN 1 08 28 02 2012 GSC53N GSC57 ZG47 Instruction Manual...
Page 2: ......
Page 151: ......
