14.
Route and connect the cables depending on the server configuration. For more information, see
on page 118.
CAUTION:
When routing cables, always be sure that the cables are not in a position where they can be
pinched or crimped.
15.
Install the fan cage holders (
on page 45).
16.
Install the fan cage (
on page 43).
17.
If removed, do one of the following:
• Install the processor mezzanine tray (
Installing a processor mezzanine tray
on page 102).
• Install the 2P pass-through performance board (
Installing the 2P pass-through performance board
on page 107).
18.
Install the air baffle (
on page 41).
CAUTION:
To avoid damaging the connectors, always install the air baffle into the server before installing the
riser cages.
19.
Install the primary PCIe riser cage (
Installing the primary PCIe riser cage
20.
Install the butterfly PCIe riser cage (
Installing a butterfly PCIe riser cage
on page 80).
21.
Install the access panel (
on page 37).
22.
Install the server into the rack (
Installing the server into the rack
23.
Connect each power cord to the server.
24.
Connect each power cord to the power source.
Installing hardware options
61