HPE ProLiant DL580 Gen10, User Manual

Page: 110 / 158

11. Install the air baffle ( Installing the air baffle on page 41).
CAUTION:
To avoid damaging the connectors, always install the air baffle into the server before installing the
riser cages.
12. Install the fan cage ( Installing the fan cage on page 43).
13. Install the primary PCIe riser cage ( Installing the primary PCIe riser cage on page 38).
14. Install the butterfly PCIe riser cage ( Installing a butterfly PCIe riser cage on page 80).
15. Install the access panel ( Installing the access panel on page 37).
16. Install the server into the rack ( Installing the server into the rack on page 53).
17. Connect each power cord to the server.
18. Connect each power cord to the power source.
19. Power up the server on page 32.
Installing an intrusion detection switch
Prerequisites
Before installing this option, be sure that you have the following:
The components included with the hardware option kit
Procedure
1. Power down the server on page 32.
2. Remove all power:
110 Installing an intrusion detection switch