12.
If drive blanks are installed in the drive cage assembly, remove the drive blanks. Retain the drive blanks
for use in empty drive bays.
13.
Route the cables through the opening, and then install the universal media bay.
CAUTION:
When routing cables, always be sure that the cables are not in a position where they can be
pinched or crimped.
14.
Connect the cables depending on the server configuration. For more information, see
on page
118.
CAUTION:
When routing cables, always be sure that the cables are not in a position where they can be
pinched or crimped.
15.
Install the drive bay blank into box 1.
68
Installing hardware options
