Installing fan cage holders
Procedure
1.
Install the fan cage holders.
2.
on page 43).
3.
If removed, do the following:
• Install the processor mezzanine tray (
Installing a processor mezzanine tray
on page 102).
• Install the 2P pass-through performance board (
Installing the 2P pass-through performance board
on page 107).
4.
on page 37).
5.
Install the server into the rack (
Installing the server into the rack
on page 53).
6.
Connect each power cord to the server.
7.
Connect each power cord to the power source.
on page 32.
Removing the processor mezzanine tray
Procedure
on page 32.
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
Installing fan cage holders
45