HPE ProLiant DL380 Gen10 User Manual Download Page 93

Page: 93 / 201

a. Disconnect each power cord from the power source.

b. Disconnect each power cord from the server.

3. Do one of the following:

•

Extend the server from the rack.

•

Remove the server from the rack.

4. Remove the access panel.

5. Do one of the following:

•

Remove the air baffle.

•

If installed, remove the 4 LFF midplane drive cage.

6. Do one of the following:

• For Type-a Smart Array controllers, install the controller in the Smart Array modular controller connector.

• For Type-p Smart Array controllers,

install the controller in a compatible expansion slot.

7. Cable the controller.

The installation is complete.

Installing an HPE Smart Array P824i-p MR Gen10 controller in a configured server

Procedure

Back up data on the system.

Close all applications.

Update the server firmware if it is not the latest revision.

Do one of the following:

Hardware options installation

Summary of Contents for ProLiant DL380 Gen10










































































































































































































Search results

Summary of Contents for ProLiant DL380 Gen10

Reviews:

Related manuals for ProLiant DL380 Gen10

Brands by name

Popular brands

HPE ProLiant DL380 Gen10, User Manual

Search results

Summary of Contents for ProLiant DL380 Gen10

Reviews:

Related manuals for ProLiant DL380 Gen10

Brands by name

Popular brands