HPE ProLiant DL380 Gen10 User Manual Download Page 174 | Manualshive

Page: 174 / 201

background image

Software and configuration utilities

Server mode

The software and configuration utilities presented in this section operate in online mode, offline mode, or in both modes.

Software or configuration utility

Server mode

Active Health System

Online and Offline

Online and Offline

HPE Smart Storage Administrator

Online and Offline

iLO RESTful API

Online and Offline

Intelligent Provisioning

Online and Offline

Scripting Toolkit for Windows and Linux

Online

Service Pack for ProLiant

Online and Offline

Smart Update Manager

Online and Offline

UEFI System Utilities

Offline

HPE MR Storage Administrator

Online

Online

Product QuickSpecs

For more information about product features, specifications, options, configurations, and compatibility, see the product
QuickSpecs on the Hewlett Packard Enterprise website (

https://www.hpe.com/info/qs).

Active Health System Viewer

Active Health System Viewer (AHSV) is an online tool used to read, diagnose, and resolve server issues quickly using AHS
uploaded data. AHSV provides Hewlett Packard Enterprise recommended repair actions based on experience and best
practices. AHSV provides the ability to:

• Read server configuration information

• View Driver/Firmware inventory

• Review Event Logs

Software and configuration utilities

174

«
...
172
173
174
175
176
...
»

Summary of Contents for ProLiant DL380 Gen10










































































































































































































Reviews:

No comments

Related manuals for ProLiant DL380 Gen10

Univerge SV9300

Brand: NEC Pages: 47

Univerge SV9100

Brand: NEC Pages: 766

Express5800/T110g-S

Brand: NEC Pages: 34

totalstorage 200

Brand: IBM Pages: 152

Flex System p270 Compute Node

Brand: IBM Pages: 510

LUXOMAT net ViSTATION

Brand: B.E.G. Pages: 4

SuperServer 6024H-82

Brand: Supero Pages: 122

ProLiant DL100 G2 DPSS

Brand: HP Pages: 155

NetStorage 6000

Brand: HP Pages: 192

ProLiant DL100 G2 DPSS

Brand: HP Pages: 44

Brand: Medialon Pages: 88

WPS54GU2 - Wireless-G PrintServer For USB 2.0 Print Server

Brand: Linksys Pages: 76

WPSM54G - Wireless-G PrintServer With Multifunction Printer Support Print Server

Brand: Linksys Pages: 132

Brand: G-Technology Pages: 50

Brand: Planet Pages: 71

Brand: BushkaBlue Pages: 30

LANTIME IMS-M500

Brand: Meinberg Pages: 63

Brand: 3onedata Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands