HPE ProLiant DL380 Gen10 User Manual Download Page 199

Page: 199 / 201

Support and other resources

Accessing Hewlett Packard Enterprise Support

• For live assistance, go to the Contact Hewlett Packard Enterprise Worldwide website:

https://www.hpe.com/info/assistance

• To access documentation and support services, go to the Hewlett Packard Enterprise Support Center website:

https://www.hpe.com/support/hpesc

Information to collect

• Technical support registration number (if applicable)

• Product name, model or version, and serial number

• Operating system name and version

• Firmware version

• Error messages

• Product-specific reports and logs

• Add-on products or components

• Third-party products or components

Accessing updates

• Some software products provide a mechanism for accessing software updates through the product interface. Review your

product documentation to identify the recommended software update method.

• To download product updates:

Hewlett Packard Enterprise Support Center

https://www.hpe.com/support/hpesc

Hewlett Packard Enterprise Support Center: Software downloads

https://www.hpe.com/support/downloads

My HPE Software Center

https://www.hpe.com/software/hpesoftwarecenter

• To subscribe to eNewsletters and alerts:

https://www.hpe.com/support/e-updates

• To view and update your entitlements, and to link your contracts and warranties with your profile, go to the Hewlett

Packard Enterprise Support Center

More Information on Access to Support Materials page:

https://www.hpe.com/support/AccessToSupportMaterials

Support and other resources

199

Summary of Contents for ProLiant DL380 Gen10










































































































































































































Search results

Summary of Contents for ProLiant DL380 Gen10

Reviews:

Related manuals for ProLiant DL380 Gen10

Brands by name

Popular brands

HPE ProLiant DL380 Gen10, User Manual

Search results

Summary of Contents for ProLiant DL380 Gen10

Reviews:

Related manuals for ProLiant DL380 Gen10

Brands by name

Popular brands