50
Switch model
Port
mode
LED
(Mode)
status
LED
Status Description
the port, or the port is
not operating at 10/100
Mbps.
Flashing
green (PoE
mode)
Green LED
Steady on
The port is supplying
PoE correctly.
Flashing (3
Hz)
•
The PD power
requirement
exceeds the port
PoE capacity.
•
The port fails to
meet the power
requirement of the
PD because of
power
insufficiency of the
switch.
Off
The port is not
supplying PoE power.
Yellow
LED
Steady on
A non-PD device is
attached to the port, or
the port is experiencing
a PoE failure.
Flashing (3
Hz)
The port has failed
POST.
Off
The port is not
supplying PoE power.
1/10GBase-T autosensing Ethernet port LEDs
•
The HPE 5130 48G 2SFP+ 2XGT EI and HPE 5130 48G PoE+ 2SFP+ 2XGT (370W) EI
switches provide a double-color (green and yellow) LED for each 1/10GBase-T autosensing
Ethernet port to indicate its operating status.
Table 25 1/10GBase-T autosensing Ethernet port double-color LED description
Status Description
Steady green
The port is operating at 10 Gbps and a link is present on the port.
Flashing green
The port is sending or receiving data at 10 Gbps.
Steady yellow
The port is operating at 1 Gbps and a link is present on the port.
Flashing yellow (not 3
Hz)
The port is sending or receiving data at 1 Gbps.
Flashing yellow (3
Hz)
The port has failed POST.
Off
•
No link is present on the port.
•
The port mode LED is operating in PoE mode (applicable to the PoE
switch models.)
