46
Figure 51 SFP+ cable
(1) Connector
(2) Pull latch
Combo interface
The HPE 5130 24G SFP 4SFP+ EI switch provides eight combo interfaces. A combo interface
includes an SFP port and a 10/100/1000Base-T autosensing Ethernet port. Only one of these two
ports can operate at a time.
LEDs
System status LED
The system status LED shows the operating status of the switch.
Table 19 System status LED description
LED mark
Status
Description
SYS
Steady green
The switch is operating correctly.
Flashing green
The switch is performing power-on self test (POST).
Steady red
The switch has failed POST.
Flashing yellow
Some ports have failed POST.
Off
The switch is powered off.
Power supply status LED
The HPE 5130 24G SFP 4SFP+ EI switch provides the PWR1 and PWR2 LEDs on the front panel to
indicate the operating status of the power supplies.
