HPE FlexNetwork 5130 EISeries Installation Manual Download Page 51 | Manualshive

Page: 51 / 67

background image

47

Table 20 Power supply status LED description

LED mark

Status

Description

PWR1/PWR2

Steady green

A power supply is installed in the power supply slot, and the
power supply is outputting power correctly.

Steady yellow

A power supply is installed in the power supply slot, but the
power supply is faulty or not powered on.

Steady red

A power supply is installed in the power supply slot, but the
power supply is faulty.

Off

No power supply is installed in the power supply slot.

RPS status LED

The HPE 5130 48G 2SFP+ 2XGT EI, HPE 5130 24G PoE+ 2SFP+ 2XGT (370W) EI, HPE 5130 48G
PoE+ 2SFP+ 2XGT (370W) EI, HPE 5130 24G PoE+ 4SFP+ (370W) EI, HPE 5130 24G PoE+
4SFP+ (370W) EI BR, HPE 5130 48G 4SFP+ EI, HPE 5130 48G 4SFP+ EI BR, HPE 5130 48G
PoE+ 4SFP+ (370W) EI BR, and HPE 5130 48G PoE+ 4SFP+ (370W) EI switches support RPS
input and provide an RPS status LED on the front panel to indicate the RPS operating status.

Table 21 RPS status LED description

LED mark

Status

Description

RPS

Steady green

Both the RPS DC input and the AC input are normal.

Steady yellow

The RPS DC input is normal, but the AC input is disconnected or
has failed.

Off

The RPS DC input has failed, or no RPS is connected.

Port mode LED

The HPE 5130 24G PoE+ 2SFP+ 2XGT (370W) EI, HPE 5130 48G PoE+ 2SFP+ 2XGT (370W) EI,
HPE 5130 24G PoE+ 4SFP+ (370W) EI, HPE 5130 24G PoE+ 4SFP+ (370W) EI BR, HPE 5130 48G
PoE+ 4SFP+ (370W) EI BR, and HPE 5130 48G PoE+ 4SFP+ (370W) EI switches provide a port
mode LED. The port mode LED indicates the type of information that the network port LEDs are
showing. You can use the port LED mode switching button to change the type of displayed port
information.

Table 22 Port mode LED description

LED mark

Status

Description

Mode

Steady green

The network port LEDs are showing port rates.

Flashing green

The network port LEDs are showing the PoE status of the
ports.

10/100/1000Base-T autosensing Ethernet port LED

•

The HPE 5130 48G 2SFP+ 2XGT EI, HPE 5130 48G PoE+ 2SFP+ 2XGT (370W) EI, HPE 5130
24G SFP 4SFP+ EI, HPE 5130 48G 4SFP+ EI, HPE 5130 48G 4SFP+ EI BR, HPE 5130 48G
PoE+ 4SFP+ (370W) EI, and HPE 5130 48G PoE+ 4SFP+ (370W) EI BR switches provide a

«
...
49
50
51
52
53
...
»

Summary of Contents for FlexNetwork 5130 EISeries




































































Reviews:

No comments

Related manuals for FlexNetwork 5130 EISeries

SmartSwitch 6500

Brand: Cabletron Systems Pages: 62

Brand: Techroutes Pages: 22

Brand: National Instruments Pages: 23

Brand: GHIELMETTI Pages: 12

Pow-R-Line SPX0361126

Brand: Eaton Pages: 584

MicroHub GUH274W3

Brand: IOGear Pages: 1

Brand: Endress+Hauser Pages: 25

Brand: M-system Pages: 4

Brand: KYLAND Pages: 34

Brand: TRENDnet Pages: 2

Brand: Black Box Pages: 20

Brand: 3Com Pages: 74

Brand: HDTV Supply Pages: 21

kontron KSwitch D1 UGPD

Brand: S&T Pages: 40

ISCOM2600G (A) Series

Brand: Raisecom Pages: 96

Brand: A SYSTEMS Pages: 80

EG5-0702-SFP Series

Brand: Leonton Pages: 21

Sure-Wave CM-330/N

Brand: CAMDEN Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands