124
Operator's Manual
B 235 Evo
15.9. SET UP - ADHESIVE WEIGHT
APPLICATION POSITION
The machine makes it possible for the operator to select where the adhesive weight should
be applied based on his needs. To select this configuration, proceed as described below:
- Press the
key.
- use the
keys to search for SEt UP
- press the
key to confirm
- use the
keys to search for ALU H.12 (ALU CLP – ALU H.6), using the laser
line if present
- press the
key to change the setting:
TYPE OF WEIGHT
TO BE APPLIED
CONFIGURATION
SELECTED
WEIGHT APPLICATION POSITION
Traditional clip
Always 12 o'clock
Adhesive
MOTORCYCLE
programme
Always 12 o'clock
Adhesive
H.12
12 o'clock in all balancing programmes
Adhesive
LAS
(if applicable)
6 o'clock position, via the LASER line, when
the adhesive weight is inside the rim
12 o'clock position when the adhesive
weight is outside the rim
Adhesive
CLP
using the weight-holder terminal in the ALU
1P/ALU 2P balancing programmes, or manu-
ally, taking the centre of the gripper cavity
as your reference for the midway point of
the weight, or using the 12 o'clock position
for ALU Statistics programmes
- press the
key to confirm and exit.
