Operator's Manual
B 235 Evo
99
16b
- if only one measurement is taken, the machine
interprets the presence of a rim with balancing
using a clip weight on both sides (Dynamic
Balancing Programme)
- moving the arm to the rest position, the ma-
chine will set up for the manual WIDTH entry.
- in this phase, it is possible to perform an ad-
ditional acquisition of the rim diameter and
distance.
- Measure the width of the rim using the pro-
vided calliper (fig. 17).
- Modify the width value displayed by pressing
the
keys until the desired
value is set.
The WIDTH can be set in millimetres or the values already set can be converted from inches
to millimetres by pressing the
button.
17
