Operator's Manual
B 235 Evo
95
- Insert the special C key (supplied with the machine) in the slot of the C hub (fig.12);
12
- Completely unscrew the C hub;
- Mount the flange on the shaft and lock it in place with the two screws (A, fig.13) using the CH
6 wrench.
13
A
- Lock the wheel onto the flange as usual.
Assembling the C hub
To reassemble the C hub, proceed as follows:
- press button A (figure 11) to discharge any air that may be in the clamping system;
- insert the split pin (supplied with the machine) in the cylindrical protection bush (B, fig.14)
14
- Screw the C hub down manually until it reaches the end position
- Tighten the C hub by inserting the special C key in the C hub slot (fig.15).
- Remove the split pin from the cylindrical protection bush.
