Operator's Manual
B 235 Evo
105
5. ENTERING DIMENSIONS IN THE
MOTORCYCLE PROGRAMMES
The operations described below are valid if the motorcycle setting (bike) has been ac-
tivated in the "vehicle type" set up.
- Fit the appropriate extension on the inner measuring arm, specifically extension A on
machines with no weight holder or extension B on machines with weight holder (Fig.21).
21
- To acquire the wheel dimensions, follow the instructions in the paragraph “Entering
wheel dimensions”.
6. WHEEL SPIN
Wheel spins take place automatically by lowering the guard or pressing the
key
with the guard lowered.
A special safety device stops rotation if the guard is raised during the spin; in this case,
the “
A Cr
” message is displayed.
WARNING
To obtain the most accurate results, do not apply any undue stress to the machine dur-
ing wheel spin.
CAUTION
Do not operate the machine without the guard and/or if the safety device has been
tampered with.
CAUTION
Never raise the guard before the wheel has come to a stop.
