116
Operator's Manual
B 235 Evo
- use the
keys to search for OPE 1 (or OPE 2 if previously set)
• press the
key to change the setting:
or
1
first operator
or
2
second operator
- press the
key to confirm and exit
Activation of the second operator is indicated by the illumination of the LED
on
the display panel.
Repeat the procedure described above to return to the first operator.
14. WHEEL SPIN COUNTER
This programme is used to display the total number of spins performed by the machine
since its first start-up
(tot SPi)
, the number of spins performed since the last unbalance
calibration
(CAL SPi)
and the number of partial spins performed since the machine was
last started
(PAr SPi)
.
Proceed as follows to recall this programme:
• press the
key
• use the
keys to search for
-SP in-
• Press the
key to display the total number of spins performed by the machine
since its first start-up
(tot SPi)
• Press the
key to display the number of spins performed since the last sensitivity
calibration
(CAL SPi)
. It is reset at each new calibration.
• Press the
key to display the number of spins performed since the last sensitivity
