Operator's Manual
B 235 Evo
81
CAUTION
Correctly fit the plate as shown below in the figure.
3b
Installing the wheel guard with the corresponding mounting (Fig. 4)
- Install the bush (A, fig. 4) on the rotation pivot (B, fig. 4). While doing this, ensure that
the groove on the pivot is aligned with the pin in the bush;
4
- Fasten the tube on the pivot using the M12 screw supplied.
- Insert the metal tube (D, Fig. 4a) into the two plastic guard front holes (C, Fig. 4a);
- Couple the guard to the rear side of the tube by inserting it into the correct position
