Operator's Manual
B 235 Evo
93
KEY
DESCRIPTION
3
Internal weight
selection/
Decrease
Multifunction key
1. in balancing mode, press this key to select the
type of weight to use on the inner side of the wheel.
2. in the menu press this key to navigate.
3. when entering dimensions manually, press this
key to decrease the displayed value.
4
Menu / Enter
Multifunction key
1. in balancing mode, press this key to access the
wheel balancer menu.
2. in a menu or in a program, press this key to
change the viewed option.
5
Outer weight
selection/In-
crease
Multifunction key
1. in balancing mode, press this key to select the
type of weight to use on the outer side of the wheel.
2. in the menu press this key to navigate.
3. when entering dimensions manually, press this
key to increase the displayed value.
6
Start
- Press this key to perform a spin with the wheel
guard lowered
- Search for another side (with RPA active and
wheel guard open)
7
Stop
- Press this key to stop the spin
1. SWITCHING ON THE
MACHINE
Connect the power supply cable (A, Fig.10) supplied
with the machine from the external electrical panel
located on the rear side of the wheel balancer body
to the mains.
Switch on the machine using the switch on the rear
side of the body (B, Fig.10).
The wheel balancer performs a checking test (all
the LEDs illuminate), and if no faults are detected,
a beeper sounds and the cycle status initially active
is displayed, as follows:
- active balancing mode: dynamic (dyn);
10
