118
Operator's Manual
B 235 Evo
21
- press the
key to confirm
- use the
keys to search for CAr on (or CAr oFF if previously set)
- press the
key to change the setting:
CAr on to activate the car working environment
CAr on to activate the motorcycle working environment
- press the
key to confirm and exit.
Warning
Proceed as follows to balance a motorcycle
wheel:
- fit the motorcycle wheel adapter A (AUMO)
on the wheel balancer as shown in Fig. 26;
- insert the two screws that are supplied in
the holes on the wheel contact flange;
- tighten the screws on the adapter making
sure that it rests on the flange correctly;
- fit the most suitable pin (depending on
the wheel central hole) onto the shaft after
removing the threaded hub;
- mount the wheel after selecting the centring
cones (one for each side of the wheel), tighten
with the appropriate ring nut using the spac-
ers necessary for coupling the securing cones to the
threaded part of the shaft.
- mount the relative extension (A, Fig.21) on the internal
measuring arm.
- set the wheel data as shown in the paragraph "Enter-
ing wheel dimensions”.
Important
the wheel must be fixed to the flange so as to avoid
any movement of the two during the spin or braking
phases.
Best results can be achieved if the adhesive weights
are positioned with the outer edge flush with the
rim edge.
26
