See
“About errors attributable to disk array systems” (page 133)
E10000D3
Message
S-Vol LU: [LU number of S-VOL] pair is not ready for VSS Backup
Explanation
S-VOL is not ready for a backup.
Recommended action
[XP P9500/XP7]
Set the pair status for the backup to PAIR using Storage Management Software.
E10000D4
Message
P-Vol LU: [LU number of P-VOL] does not have any Business Copy pairs
Explanation
Not a Business Copy pair configuration.
Recommended action
[XP P9500/XP7]
Create the S-VOL in PAIR status using Storage Management Software.
E10000D7
Message
Failed to create Snapshot pair for P-Vol: [LU number of P-VOL]. There are no data/Fast Snap
pools available.
Explanation
Cannot create Snapshot pair.
Recommended action
•
(1) Perform the following using Storage Management Software.
[XP P9500/XP7]
◦
1) If Snapshot P.P is not valid, make it valid. (See Table 3.3-2)
◦
2) Delete any Snapshot pairs which are not used when the number of Snapshot pairs
has reached the maximum.
◦
3) Delete any V-VOLs which are not used when the number of V-VOLs has reached
the maximum.
◦
4) Delete any host groups which are not used when the number of host groups existing
in the disk array system has reached the maximum.
90
Troubleshooting
Summary of Contents for XP
Page 51: ...5 Missing number 51 ...
