HP XP, User Manual

Page: 40 / 148

In case of XP7, specify the value which includes the disk array system serial number identifier
"3" for <Serial Number>.
NOTE: Similar mode can be specified from the GUI tool. If the setting was different between
GUI tool and the setup file, give priority to the setting specified in the setup file.
Formatting:
[datapool=<serial number>@< data pool /Fast Snap pool number>]
Example:
[datapool=54321@23]
[datapool=300002@127]
•
Waiting time for resource lock — Waiting time (unit: second) for resource lock can be changed
depending on the value of <Wait time>.
Specify between 10 seconds and 86400 seconds (24 hours).
<Wait time> should be specified in single-byte decimal numbers.
If this value is omitted, or an invalid value is used, or the value is outside the maximum and
minimum values, the default value of 600 seconds is used.
Formatting:
[lockwait=<Wait time>]
Example:
[lockwait=60]
•
The number of unmapping retries of secondary VOL — Specify the number of retries when
unmapping the secondary VOL(S-VOL/V-VOL) from the import destination server during
the backup completion process.
Specify the number of retries between 10 and1000 times.
◦
<the number of retries>should be specified in single-byte decimal numbers.
◦
If this value is omitted, or an invalid value is used, or the value is outside the maximum
and minimum values, the default value of 30 times is used.
Formatting:
[delmap_retrycnt=<the number of retries>]
Example:
[delmap_retrycnt=30]
•
Restore mode — Specify an operation mode in the restore processing that uses the Business
Copy function.
◦
The restore processing is performed in Quick restore when the QUICK mode is selected,
and in Normal restore when the NORMAL mode is selected.
◦
If the value is omitted or an invalid value is used, the restore mode depends on system
options.
* As a system option, Quick restore is set by default.
* This setting takes priority over the setting in the system option.
Formatting:
[RestoreMode=QUICK]
40 Configuration Procedure