HP XP User Manual Download Page 114

Page: 114 / 148

Explanation

Failed to get storage information

Recommended action

•

(1) Confirm the IP address or serial number of the disk array system using Storage
Management Software, and set them in the proper format in the setup file (See subsection
3.2.1).

•

(2) Confirm that the LAN cables are connected properly.

E200203D

Message

Error: Unable to get information for P-Vol.

Explanation

Cannot get information for a P-VOL.

Recommended action

•

(1) The specified P-VOL may not exist in the disk array system. Confirm it using Storage
Management Software.

•

(2) An error occurred when an operation command was given to the disk array system.

See

“About errors attributable to disk array systems” (page 133)

E200203E

Message

Error: Unable to find the CM volume on this server. Please configure a CM volume and expose
it to this server.

Explanation

Command device is not set.

Recommended action

Map the command device using Storage Management Software.

E200203F

Message

There are no S-Vols configured for the P-Vol LU: [P-VOL LU#].

Explanation

A Business Copy pair is not configured.

Recommended action

The specified P-VOL may not been mapped to the VSS installation server (application server).
Map it by using Storage Management Software.

E2002040

Message

The S-Vols are not ready for a backup.

114

Troubleshooting

Summary of Contents for XP





















































































































































Search results

Summary of Contents for XP

Reviews:

Related manuals for XP

Brands by name

Popular brands

HP XP, User Manual

Search results

Summary of Contents for XP

Reviews:

Related manuals for XP

Brands by name

Popular brands