HP XP User Manual Download Page 87

Page: 87 / 148

E100006D

Message

Failed to add the initiator to the target. Target will be deleted

Explanation

Failed to register Initiator iSCSI Name to the target.

Recommended action

Confirm that the specified target exists by using Storage Management Software.

E100008A

Message

Failed to get Business Copy pair coupling info. Error: [Error code]

Explanation

Cannot get Business Copy pair information.

Recommended action

An error occurred when an operation command was given to the disk array system.

See

“About errors attributable to disk array systems” (page 133)

E1000090

Message

Failed[Error code]

Explanation

An error occurred while recognizing the disk array system.

Recommended action

•

(1) Confirm and perform the followings using Storage Management Software:

[XP P9500/XP7]

Confirm that the host mode setting of the host group has been set to Windows. If the setting
has been set to other than Windows, set it to Windows.

•

(2) An error occurred when an operation command was given to the disk array system.

See

“About errors attributable to disk array systems” (page 133)

E1000091

Message

Failed to get Business Copy information. Error:[ Error code]

Explanation

Cannot get Business Copy pair information.

Recommended action

An error occurred when an operation command was given to the disk array system.

See

“About errors attributable to disk array systems” (page 133)

Error messages

Summary of Contents for XP





















































































































































Search results

Summary of Contents for XP

Reviews:

Related manuals for XP

Brands by name

Popular brands

HP XP, User Manual

Search results

Summary of Contents for XP

Reviews:

Related manuals for XP

Brands by name

Popular brands