HP XP, User Manual

Page: 52 / 148

6 Repair Installation
If a file is missing in the installation folder, it can be restored by performing a repair installation.
The repair installation repairs the log folder and the setup file. All existing files are replaced.
There are three ways to perform a repair installation:
•
Run the installer.
•
Run the installer from a command prompt.
•
Use the Control Panel in Windows.
NOTE: The following procedure uses version 04.X.X. Substitute the
exe
version to be used.("X"
is a revision number and it may be multiple digits (Ex: 04.14.10).)
To repair the VSS installation using the installer, do the following:
1. Double-click the installer to start the installation wizard.
2. In the Welcome screen, select Repair , and then click Next .
The Files in Use screen is displayed if there are any applications using files that need to
be updated.
3. To start the repair installation, do one of the following:
•
Select Automatically close and attempt to restart applications , and then click OK .
A Maintenance Complete message is displayed showing that the installation of VSS
Provider is complete. Proceed to step 4.
•
Select Do not close applications (A reboot will be required) , and then click OK . You
must reboot the server manually after the repair installation is complete.
A Maintenance Complete message is displayed asking you to reboot the server. Select
Yes, I want to restart my computer now or No, I will restart my computer later , and
then proceed to step 4.
4. Click Finish .
To repair the VSS installation using the control panel, do the following:
1. Select Start → Control Panel → Programs → Programs and Features .
2. Select HP XP Storage Adapter for Microsoft® Volume ShadowCopy Service(x64) .
3. Click Change .
52 Repair Installation