HP XP User Manual Download Page 74

Page: 74 / 148

Recommended action

Network drive or removable disk cannot be specified to the installation drive. Specify a drive to
meet prerequisites. See ???.

If you are executing uninstall, execute uninstall again after repair install.

Message

There is not enough space on the disk.

Explanation

There was not sufficient space at the time of starting installation.

Recommended action

For an installation drive, prepare for available space to meet prerequisites. See

“Server

prerequisites” (page 19)

Message

Unable to save file:[File path][Error message]

Explanation

The file necessary for installation could not be saved.

Recommended action

For an installation drive, prepare for available space to meet prerequisites. See

“Server

prerequisites” (page 19)

If you start an installer concurrently, execute preceding installation processing. After this message
is displayed, a folder choice screen is displayed, but select cancel button and cancel following
installation processing.

Message

Error: -1618 Another installation is already in progress. Complete that installation before
proceeding with this install.

Explanation

Different installation has been already executed.

Recommended action

If you start an installer concurrently, execute preceding installation processing.

Message

Error: -112 There is not enough space on the disk.

Explanation

Disk space became insufficient during installation

Recommended action

For an installation drive, prepare for available space to meet prerequisites. See

“Server

prerequisites” (page 19)

Troubleshooting

Summary of Contents for XP





















































































































































Search results

Summary of Contents for XP

Reviews:

Related manuals for XP

Brands by name

Popular brands

HP XP, User Manual

Search results

Summary of Contents for XP

Reviews:

Related manuals for XP

Brands by name

Popular brands