NOTE:
Similar mode can be specified from the GUI tool. If the setting was different between
GUI tool and the setup file, give priority to the setting specified in the setup file.
•
WWN of ESXi — It is specified when using the VMware Guest to Guest Backup (FC) function.
It specifies WWN of the import destination ESXi in which the secondary VOL is imported at
the time of backup. Map S-VOL to HG in which WWN of <WWN> is registered during the
import processing of S-VOL. <WWN>should be specified in one-byte hexadecimal with 16
digits. When [wwn=<WWN>] are listed on the multiple lines, all listed WWNs will be the
mapping destination. Zoning of disk array system and WWN of ESXi need to be completed
in advance.
Formatting example for [wwn=<WWN>]:
[wwn=10000000C99267FC]
•
The number of VSSHP retries — It specifies the number of retries when an error is detected
during the retrieval of the configuration information and configuration change of the disk
array system. It should be specified between 3 and 99 times. It is only applicable to VSS
provider. It is not applied to GUI tool. <the number of retries> should be specified in decimal
single-byte characters. If this value is omitted, or an invalid value is used, or the value is
outside the maximum and minimum values, the default value of 3 times is used.
Formatting example for [vsshp_retrycount=<the number of retries>]:
[vsshp_retrycount=30]
Description
Entry format
Item
(Missing number)
(Missing number)
(Missing number)
•
Serial number — Serial number of the disk array system.
When you register a disk array system by the Add Storage function of the GUI tool, GUI tool
writes the serial number in the setup file.
To cancel registration, it is necessary to manually delete the serial number of the registered
disk array system which you want to remove.
The serial number of the registered disk array system is indicated in decimal in <serial
number>.
In case of XP7, enter the six digits which has the disk array system serial number identifier
"3" to the head of zero padded five digits serial number. For example, if the serial number
is “2”, enter as “300002”.
Formatting:
[For XP P9500] XP P9500:<serial number>, for example XP P9500:54321 XP7:300002.
[For XP7] XP7: <serial number>, for example XP7:300002.
•
Data pool /Fast Snap pool number — Specify the data pool/Fast Snap pool number used
by Snapshot.
The data pool and Fast Snap pool number should be specified for every target disk array
system. Separate the serial number and the data pool/Fast Snap pool number with a
single-byte "@" character.
Specify the serial number and data pool/Fast Snap number in decimal single-byte characters.
Leading zeros (0) are not required.
If Snapshot pair exists in P-VOL to be backed up, use the pool used by the Snapshot pair.
If the pool with Specified datapool/Fast Snap pool number does not exist in the disk array
system, an error occurs when creating the Snapshot pair and backup operation fails.
User edit files
39
Summary of Contents for XP
Page 51: ...5 Missing number 51 ...
