HP Surestore 160ex - Optical Jukebox, Service Manual

Page: 66 / 230

Operation and Configuration
Setting an Operating Configuration
Chapter 3 3-20
Setting an Operating Configuration
READY
>
ADMIN *
>
CONFIG *
Configurations customize the way the jukebox operates.
Start with
READY
in the display .
1. Press
NEXT
until
ADMIN *
displays.
2. Enter the administration password.
You may have to coordinate with the system administrator to enter
the password.I
3.
TEST *
displays. Press
NEXT
until
CONFIG *
displays, and then press
ENTER
.
4. Press
NEXT
or
PREV
until the name of the configuration you want to
set displays and then press
ENTER
. (Configurations are described on
the following pages.)
If the configuration has multiple settings, the current setting flashes.
Otherwise, the configuration is set and a confirmation message
displays.
5. If the current configuration setting is flashing, press
NEXT
or
PREV
until the desired setting displays, and then press
ENTER
.
OPTION
SAVED
displays and then the configuration’s name and setting
displays.
6. Press
CANCEL
to return to
READY
.
CAUTION Turning off the jukebox in the next step could cause data loss if not done
correctly.
Do not turn off power to the jukebox until you are sure the SCSI bus
is
inactive . Removing power from a SCSI device when the bus is
active can result in data loss and/or indeterminate bus states. Check
the host system manuals for information about checking the SCSI bus
status.
7. Turn the jukebox OFF, then ON to save the configuration to the
jukebox flash ROM.