HP Surestore 160ex - Optical Jukebox, Service Manual

Page: 63 / 230

Operation and Configuration
Setting the SCSI IDs
Chapter 3 3-17
Operation
and
C
onf
ig
urat
io
n
Changing the Current SCSI IDs
READY
>
ADMIN *
>
SCSI ID’S *
>
SET ID’S *
Start with
READY
in the display .
1. Press
NEXT
until
ADMIN *
displays, and then press
ENTER
.
2. Enter the administration password.
You may have to coordinate with the system administrator to enter
the password.
3. Press
NEXT
until
SCSI ID’S
displays, and then press
ENTER
.
4.
VIEW ID’S
displays. Press
NEXT
until
SET ID’S
displays and then
press
ENTER
.
If the jukebox configuration uses basic SCSI addressing (LUN mode
OFF)
:
JKBX ID # LUN #
or
DRV # ID # LUN #
displays. (
JKBX ID #
stands for the current ID of the jukebox controller,
LUN #
is the
current logical unit number, and
DRV # ID #
is the current ID setting
for the displayed drive number.) When using basic SCSI addressing,
the
LUN #
is always
0
.
If the jukebox configuration uses LUN addressing (LUN mode ON) :
JKBX ID #
or
DRVs # ID
displays. (“
#
” is the current ID for the
jukebox controller and drives when LUN mode is ON.)
5. Press
NEXT
until the setting you wish to change displays, and then
press
ENTER
. The
#
(current ID) begins flashing.