59
Core Switch 2/64 and SAN Director 2/128 installation guide
Customize a switch name
The
switch
name of the Core Switch 2/64 or the SAN Director 2/128 Director can be up to
15 characters long; can include alpha, numeric, and underscore characters; and must begin
with an alpha character. The default name for the Core Switch 2/64 or the SAN Director
2/128 is
swDir
. HP recommends using
swDir
in the name to allow easy identification.
To customize the name, follow these steps:
1.
Enter the
switchName
command with the new name in quotes.
Example:
For details about the
switchName
command, refer to the
HP StorageWorks command
reference guide
for the Fabric OS version running on your switch
.
2.
Record the new name for future reference.
NOTE:
Changing the name causes a domain address format RSCN to be issued.
Specify status policies
To specify custom status policies, follow these steps:
1.
Enter the
switchStatusPolicySet
command at the prompt.
For more information about the
switchStatusPolicySet
command, refer to the
HP
StorageWorks command reference guide
for the Fabric OS version running on your switch
.
2.
Complete the prompts to specify the desired policies.
NOTE:
To completely deactivate an alarm for a particular condition, enter
0
at the
corresponding prompt.
swDir:admin> switchName "sw10"
Summary of Contents for StorageWorks 2/64 - Core Switch
