HP ProLiant WS460c Gen9 Maintenance And Service Manual Download Page 8

Page: 8 / 102

Customer self repair 8

CSR-Teile werden abhängig von der Verfügbarkeit und vom Lieferziel am folgenden Geschäftstag

geliefert. Für bestimmte Standorte ist eine Lieferung am selben Tag oder innerhalb von vier Stunden

gegen einen Aufpreis verfügbar. Wenn Sie Hilfe benötigen, können Sie das Hewlett Packard Enterprise

Support Center anrufen und sich von einem Mitarbeiter per Telefon helfen lassen. Den Materialien von

Hewlett Packard Enterprise, die mit einem CSR-Ersatzteil geliefert werden, können Sie entnehmen, ob

das defekte Teil an Hewlett Packard Enterprise zurückgeschickt werden muss. Wenn es erforderlich ist,

das defekte Teil an Hewlett Packard Enterprise zurückzuschicken, müssen Sie dies innerhalb eines

vorgegebenen Zeitraums tun, in der Regel innerhalb von fünf (5) Geschäftstagen. Das defekte Teil

muss mit der zugehörigen Dokumentation in der Verpackung zurückgeschickt werden, die im

Lieferumfang enthalten ist. Wenn Sie das defekte Teil nicht zurückschicken, kann Hewlett Packard

Enterprise Ihnen das Ersatzteil in Rechnung stellen. Im Falle von Customer Self Repair kommt Hewlett

Packard Enterprise für alle Kosten für die Lieferung und Rücksendung auf und bestimmt den Kurier-

/Frachtdienst.
Weitere Informationen über das Hewlett Packard Enterprise Customer Self Repair Programm erhalten

Sie von Ihrem Servicepartner vor Ort. Informationen über das CSR-Programm in Nordamerika finden

Sie auf der Hewlett Packard Enterprise Website unter (

http://www.hpe.com/support/selfrepair

Parts-only Warranty Service (Garantieservice

ausschließlich für Teile)

Ihre Hewlett Packard Enterprise Garantie umfasst möglicherweise einen Parts-only Warranty Service

(Garantieservice ausschließlich für Teile). Gemäß den Bestimmungen des Parts-only Warranty Service

stellt Hewlett Packard Enterprise Ersatzteile kostenlos zur Verfügung.
Für den Parts-only Warranty Service ist das CSR-Verfahren zwingend vorgegeben. Wenn Sie den

Austausch dieser Teile von Hewlett Packard Enterprise vornehmen lassen, werden Ihnen die Anfahrt-

und Arbeitskosten für diesen Service berechnet.

Reparaciones del propio cliente

Los productos de Hewlett Packard Enterprise incluyen muchos componentes que el propio usuario

puede reemplazar (Customer Self Repair, CSR) para minimizar el tiempo de reparación y ofrecer una

mayor flexibilidad a la hora de realizar sustituciones de componentes defectuosos. Si, durante la fase

de diagnóstico, Hewlett Packard Enterprise (o los proveedores o socios de servicio de Hewlett Packard

Enterprise) identifica que una reparación puede llevarse a cabo mediante el uso de un componente

CSR, Hewlett Packard Enterprise le enviará dicho componente directamente para que realice su

sustitución. Los componentes CSR se clasifican en dos categorías:

•

Obligatorio

—Componentes cuya reparación por parte del usuario es obligatoria. Si solicita a

Hewlett Packard Enterprise que realice la sustitución de estos componentes, tendrá que hacerse

cargo de los gastos de desplazamiento y de mano de obra de dicho servicio.

•

Opcional

—Componentes cuya reparación por parte del usuario es opcional. Estos componentes

también están diseñados para que puedan ser reparados por el usuario. Sin embargo, si precisa

que Hewlett Packard Enterprise realice su sustitución, puede o no conllevar costes adicionales,

dependiendo del tipo de servicio de garantía correspondiente al producto.

NOTA

: Algunos componentes de Hewlett Packard Enterprise no están diseñados para que puedan

ser reparados por el usuario. Para que el usuario haga valer su garantía, Hewlett Packard Enterprise

pone como condición que un proveedor de servicios autorizado realice la sustitución de estos

componentes. Dichos componentes se identifican con la palabra "No" en el catálogo ilustrado de

componentes.
Según la disponibilidad y la situación geográfica, los componentes CSR se enviarán para que lleguen a

su destino al siguiente día laborable. Si la situación geográfica lo permite, se puede solicitar la entrega

Summary of Contents for ProLiant WS460c Gen9







































































































Search results

Summary of Contents for ProLiant WS460c Gen9

Reviews:

Related manuals for ProLiant WS460c Gen9

Brands by name

Popular brands

HP ProLiant WS460c Gen9, Maintenance And Service Manual

Search results

Summary of Contents for ProLiant WS460c Gen9

Reviews:

Related manuals for ProLiant WS460c Gen9

Brands by name

Popular brands