HP ProLiant WS460c Gen9, Maintenance And Service Manual

Page: 38 / 102

Removal and replacement procedures 38
2.
Remove the graphics server blade (" Remove the graphics blade " on page 26 ).
3.
Place the graphics server blade on a flat, level work surface.
4.
Remove the expansion blade access panel (" Expansion blade access panel " on page 31 ).
5.
Remove the expansion blade front bezel (" Remove the expansion module front bezel " on page
29 ).
6.
Remove the foam gasket (on page 27 ).
7.
Disconnect the power cable from the expander power board and the PCI graphics option.
8.
Remove the graphics expansion control cable.
9.
Remove the retaining block (on page 29 ).
10.
Remove the expansion blade PCIe card cage (on page 28 ).
11.
Remove the expansion blade from the host side (on page 30 ).
12.
Remove the mezzanine assembly (" Mezzanine assembly " on page 34 ).
13.
Remove the PCIe mezzanine pass-through board (" Mezzanine options " on page 35 ).
14.
Remove the PCIe mezzanine pass-through bracket.
o
Single PCIe mezzanine pass-through bracket