HP ProLiant WS460c Gen9, Maintenance And Service Manual, Page: 28 / 102

Removal and replacement procedures 28
6.
Remove the foam gasket.
Remove the expansion blade PCIe card cage
1.
Power down the graphics server blade (on page 25 ).
2.
Remove the graphics server blade (" Remove the graphics blade " on page 26 ).
3.
Place the graphics server blade on a flat, level work surface.
4.
Remove the expansion blade access panel (" Expansion blade access panel " on page 31 ).
5.
Remove the expansion module front bezel (on page 29 ).
6.
Remove the foam gasket (on page 27 ).
7.
Disconnect the power cable from the expander power board and the PCI graphics option.
8.
Remove the graphics expansion control cable.
9.
Remove the retaining block (on page 29 ).
10.
Remove the expansion blade PCIe card cage.