HP ProLiant WS460c Gen9 Maintenance And Service Manual Download Page 77 | Manualshive

Page: 77 / 102

background image

Diagnostic tools 77

administrators who verify graphics server blade installations, troubleshoot problems, and perform repair

validation.
The Insight Diagnostics Offline Edition performs various in-depth system and component testing while

the OS is not running. To run this utility, boot the graphics server blade using Intelligent Provisioning.
The Insight Diagnostics Online Edition is a web-based application that captures system configuration

and other related data needed for effective graphics server blade management. Available in Microsoft

Windows and Linux versions, the utility helps to ensure proper system operation.
For more information or to download the utility, see the Hewlett Packard Enterprise website

http://www.hpe.com/servers/diags

).The Insight Diagnostics Online Edition is also available in the SPP.

HPE Insight Diagnostics survey functionality

HPE Insight Diagnostics (on page

) provides survey functionality that gathers critical hardware and

software information on ProLiant graphics server blades.
This functionality supports operating systems that are supported by the graphics server blade. For

operating systems supported by the graphics server blade, see the Hewlett Packard Enterprise website

http://www.hpe.com/info/supportos

If a significant change occurs between data-gathering intervals, the survey function marks the previous

information and overwrites the survey data files to reflect the latest changes in the configuration.
Survey functionality is installed with every Intelligent Provisioning-assisted Insight Diagnostics

installation, or it can be installed through the SPP.

HPE Insight Remote Support

Hewlett Packard Enterprise strongly recommends that you register your device for remote support to

enable enhanced delivery of your Hewlett Packard Enterprise warranty, HP Care Pack Service, or

Hewlett Packard Enterprise contractual support agreement. Insight Remote Support supplements your

monitoring continuously to ensure maximum system availability by providing intelligent event diagnosis,

and automatic, secure submission of hardware event notifications to Hewlett Packard Enterprise, which

will initiate a fast and accurate resolution, based on your product’s service level. Notifications can be

sent to your authorized Hewlett Packard Enterprise Channel Partner for onsite service, if configured and

available in your country.
For more information, see

Insight Remote Support and Insight Online Setup Guide for ProLiant Servers

and BladeSystem c-Class Enclosures

on the Hewlett Packard Enterprise website

http://www.hpe.com/info/insightremotesupport/docs

). Insight Remote Support is available as part of

Hewlett Packard Enterprise Warranty, HP Care Pack Service, or Hewlett Packard Enterprise contractual

support agreement.

USB support

Hewlett Packard Enterprise graphics server blades support both USB 2.0 ports and USB 3.0 ports. Both

types of ports support installing all types of USB devices (USB 1.0, USB 2.0, and USB 3.0), but may run

at lower speeds in specific situations:

•

USB 3.0 capable devices operate at USB 2.0 speeds when installed in a USB 2.0 port.

•

When the graphics server blade is configured for UEFI Boot Mode, Hewlett Packard Enterprise

provides legacy USB support in the pre-boot environment prior to the operating system loading for

USB 1.0, USB 2.0 , and USB 3.0 speeds.

•

When the graphics server blade is configured for Legacy BIOS Boot Mode, Hewlett Packard

Enterprise provides legacy USB support in the pre-boot environment prior to the operating system

loading for USB 1.0 and USB 2.0 speeds. While USB 3.0 ports can be used with all devices in

«
...
75
76
77
78
79
...
»

Summary of Contents for ProLiant WS460c Gen9







































































































Reviews:

No comments

Related manuals for ProLiant WS460c Gen9

UniServer T1100 G3

Brand: H3C Pages: 66

UniServer R6900 G3

Brand: H3C Pages: 214

UniServer R6700 G3

Brand: H3C Pages: 151

UniServer R4900 G5

Brand: H3C Pages: 16

Brand: IBM Pages: 90

Brand: Blonder tongue Pages: 20

Brand: Black Box Pages: 46

Brand: Supermicro Pages: 70

Brand: Supermicro Pages: 78

Brand: Supermicro Pages: 82

Brand: LG-Ericsson Pages: 54

Brand: Mirapoint Pages: 98

Brand: SAFARI Pages: 28

Brand: seneye Pages: 11

Brand: Lantronix Pages: 62

Brand: PrimeArray Pages: 208

Brand: Gigabyte Pages: 166

Brand: Inspur Pages: 42

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands