HP ProLiant WS460c Gen9, Maintenance And Service Manual

Page: 34 / 102

Removal and replacement procedures 34
Mezzanine assembly
To remove the component:
1.
Back up all graphics server blade data.
2.
Power down the graphics server blade (on page 25 ).
3.
Remove the graphics server blade (" Remove the graphics blade " on page 26 ).
4.
Place the graphics server blade on a flat, level work surface.
5.
Remove the access panel (" Access panel (graphics server blade) " on page 31 ).
6.
Remove the mezzanine assembly.
To replace the component:
1.
Align the mezzanine assembly with the guide pins on the system board, and then install the
mezzanine assembly on the system board.
2.
Press down firmly on the mezzanine assembly handles, and then close the mezzanine assembly
latch.