HP ProLiant WS460c Gen9, Maintenance And Service Manual

Page: 31 / 102

Removal and replacement procedures 31
Access panel (graphics server blade)
To remove the component:
1.
Power down the graphics server blade (on page 25 ).
2.
Remove the graphics server blade (" Remove the graphics blade " on page 26 ).
3.
Press the access panel release button.
4.
Slide the access panel towards the rear of the graphics server blade, and then lift to remove the
panel.
To replace the component:
1.
Place the access panel on top of the graphics server blade.
2.
Slide the access panel forward until it clicks into place.
Expansion blade access panel
To remove the component:
1.
Power down the graphics server blade (on page 25 ).
2.
Remove the graphics server blade (" Remove the graphics blade " on page 26 ).
3.
Place the graphics server blade on a flat, level work surface.
4.
Remove the access panel.
To replace the component, reverse the removal procedure.
Expansion blade PCIe card cage
To remove the component:
1.
Power down the graphics server blade (on page 25 ).
2.
Remove the graphics server blade (" Remove the graphics blade " on page 26 ).
3.
Place the graphics server blade on a flat, level work surface.
4.
Remove the expansion blade access panel (" Expansion blade access panel " on page 31 ).
5.
Remove the expansion module front bezel (on page 29 ).