HP ProLiant DL385p, Maintenance And Service Manual

Page: 38 / 102

Removal and replacement procedures 38
To replace the component, reverse the removal procedure.
Optical drive
To remove the component:
1.
Power down the server (on page 25 ).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Extend (" Extend the server from the rack " on page 26 ) or remove (" Remove the server from the rack "
on page 27 ) the server from the rack.
4.
Remove the access panel (" Access panel " on page 30 ).
5.
Remove the air baffle (on page 31 ).
6.
Remove the fan cage (" Fan cage " on page 41 ).
7.
Disconnect the optical drive cable.