HP ProLiant DL385p, Maintenance And Service Manual

Page: 70 / 102

Removal and replacement procedures 70
WARNING: To reduce the risk of personal injury, electric shock, or damage to the equipment,
remove the power cord to remove power from the server. The front panel Power On/Standby
button does not completely shut off system power. Portions of the power supply and some
internal circuitry remain active until AC power is removed.
Disconnect the cable as indicated.
To replace the component, reverse the removal procedure.
Chipset SATA cable option
To remove the component:
1.
Power down the server (on page 25 ).
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Extend (" Extend the server from the rack " on page 26 ) or remove (" Remove the server from the rack "
on page 27 ) the server from the rack.
4.
Remove the access panel (" Access panel " on page 30 ).
5.
Remove the air baffle (on page 31 ).
6.
Remove the fan cage (" Fan cage " on page 41 ).