HP ProLiant DL385p, Maintenance And Service Manual

Page: 27 / 102

Removal and replacement procedures 27
Remove the server from the rack
To remove the server from a Hewlett Packard Enterprise, Compaq branded, Telco, or third-party rack:
1.
Power down the server (on page 25 ).
2.
Extend the server from the rack (on page 26 ).
3.
Disconnect the cabling and remove the server from the rack. For more information, refer to the
documentation that ships with the rack mounting option.
4.
Place the server on a sturdy, level surface.
Access the Systems Insight Display
To access the Systems Insight Display in a server with an 8-drive LFF configuration:
1.
Press and release the panel.
2.
After the display fully ejects, rotate the display downward to view the LEDs.