HP ProLiant DL385p, Maintenance And Service Manual

Page: 96 / 102

Specifications 96
Rated steady-state power
750 W at 100 V to 120 V AC input
750 W at 200 V to 240 V AC input
Maximum peak power
750 W at 100 V to 120 V AC input
750 W at 200 V to 240 V AC input
750 W CS Platinum Plus power supply (94% efficiency)
Specification Value
Input requirements
—
Rated input voltage
100V to 240V AC
Rated input frequency
50 Hz to 60 Hz
Rated input current
8.5A to 3.5A
Maximum rated input power
831 W at 115 V AC input
808 W at 230 V AC input
Btus per hour
2878 at 100 V AC
2769 at 200 V AC
Power supply output
—
Rated steady-state power
750 W at 100 V to 120 V AC input
750 W at 200 V to 240 V AC input
Maximum peak power
750 W at 100 V to 120 V AC input
750 W at 200 V to 240 V AC input
750 W 48V CS DC power supply (94% efficiency)
Specification Value
Input requirements
—
Rated input voltage
-36V to -72V DC
-48V DC, nominal input
Rated input frequency
DC
Rated input current
2.3A at -36V DC
12A at -72V DC
17A at -48V DC, nominal input
Rated input power
840 W at -36V DC input
830 W at -72V DC input
820 W at -48V DC, nominal input
Btus per hour
2865 at -36V DC input
2830 at -72V DC input
2796 at -48V DC, nominal input
Power supply output
—
Rated steady-state power
750 W
Rated peak power
750 W
CAUTION: This equipment is designed to permit the connection of the earthed conductor of
the DC supply circuit to the earthing conductor at the equipment.
If this connection is made, all of the following must be met:
• This equipment must be connected directly to the DC supply system earthing electrode
conductor or to a bonding jumper from an earthing terminal bar or bus to which the DC
supply system earthing electrode conductor is connected.
• This equipment must be located in the same immediate area (such as adjacent cabinets) as
any other equipment that has a connection between the earthed conductor of the same DC