Figure 4: Removing flexible LOM
8. To replace the component, firmly seat the FlexibleLOM in the slot, and then tighten the
thumbscrew.
9. To replace the dual port PCIe 1GB NIC follow the expansion board removal instructions.
on page 26
10. Install the access panel
11. Slide the server into the rack.
12. Connect the LAN segment cables.
13. Connect each power cord to the server.
14. Connect each power cord to the power source.
15. Power up the server
Working with a PCIe riser card assembly
About this task
Use this procedure when adding or removing NIC cards.
Note:
Always follow safe electrostatic discharge practices.
Maintaining and Troubleshooting the HP DL360p G8 Server
26
Maintaining and Troubleshooting the HP ProLiant DL360p G8 Server
September 2013
