Removal and Replacement Procedures
2-42
HP ProLiant DL145 Generation 2 Server Maintenance and Service Guide
To replace the system battery:
1.
Remove the PCI riser board assembly following the procedures described on page 2-37.
2.
If necessary, remove any accessory boards or cables that prevent access to the battery
socket.
3.
Replace the battery:
IMPORTANT: Do not bend the spring latch during battery replacement. For proper operation, the
latch must maintain a position of contact with the battery.
a.
Insert a small flat-blade screwdriver or a similar tool between the battery and spring
latch to dislodge the battery from its socket.
b.
Lift up the old battery to remove it.
c.
Insert a new battery with the positive polarity (+ side) facing up, and ensure that it is
seated completely.
Ensure the spring latch is in place, and that it holds the battery firmly.
Figure 2-48: Replacing the battery
4.
Perform the post-installation procedures described on page 2-6.
All manuals and user guides at all-guides.com
